Transmittance

Electromagnetic radiation can be affected in several ways by the medium in which it propagates.  It can be scattered, absorbed, and reflected and refracted at discontinuities in the medium.  This page is an overview of the last 3. The transmittance of a material and any surfaces is its effectiveness in transmitting radiant energy; the fraction of the initial (incident) radiation which propagates to a location of interest (often an observation location). This may be described by the transmission coefficient.

Earth's atmospheric transmittance over 1 nautical mile sea level path (infrared region). Because of the natural radiation of the hot atmosphere, the intensity of radiation is different from the transmitted part.

Transmittance of ruby in optical and near-IR spectra. Note the two broad blue and green absorption bands and one narrow absorption band on the wavelength of 694 nm, which is the wavelength of the ruby laser.

Surface Transmittance

Hemispherical transmittance

Hemispherical transmittance of a surface, denoted T, is defined as

${\displaystyle T={\frac {\Phi _{\mathrm {e} }^{\mathrm {t} }}{\Phi _{\mathrm {e} }^{\mathrm {i} }}},}$

where

• Φ_e^t is the radiant flux transmitted by that surface into the hemisphere on the opposite side from the incident radiation;
• Φ_eⁱ is the radiant flux received by that surface.

Hemispheric transmittance may be calculated as an integral over the directional transmittance described below.

Spectral hemispherical transmittance

Spectral hemispherical transmittance in frequency and spectral hemispherical transmittance in wavelength of a surface, denoted T_ν and T_λ respectively, are defined as

${\displaystyle T_{\nu }={\frac {\Phi _{\mathrm {e} ,\nu }^{\mathrm {t} }}{\Phi _{\mathrm {e} ,\nu }^{\mathrm {i} }}},}$

${\displaystyle T_{\lambda }={\frac {\Phi _{\mathrm {e} ,\lambda }^{\mathrm {t} }}{\Phi _{\mathrm {e} ,\lambda }^{\mathrm {i} }}},}$

where

• Φ_e,ν^t is the spectral radiant flux in frequency transmitted by that surface into the hemisphere on the opposite side from the incident radiation;
• Φ_e,νⁱ is the spectral radiant flux in frequency received by that surface;
• Φ_e,λ^t is the spectral radiant flux in wavelength transmitted by that surface into the hemisphere on the opposite side from the incident radiation;
• Φ_e,λⁱ is the spectral radiant flux in wavelength received by that surface.

Directional transmittance

Directional transmittance of a surface, denoted T_Ω, is defined as

${\displaystyle T_{\Omega }={\frac {L_{\mathrm {e} ,\Omega }^{\mathrm {t} }}{L_{\mathrm {e} ,\Omega }^{\mathrm {i} }}},}$

where

• L_e,Ω^t is the radiance transmitted by that surface into the solid angle Ω;
• L_e,Ωⁱ is the radiance received by that surface.

Spectral directional transmittance

Spectral directional transmittance in frequency and spectral directional transmittance in wavelength of a surface, denoted T_ν,Ω and T_λ,Ω respectively, are defined as

${\displaystyle T_{\nu ,\Omega }={\frac {L_{\mathrm {e} ,\Omega ,\nu }^{\mathrm {t} }}{L_{\mathrm {e} ,\Omega ,\nu }^{\mathrm {i} }}},}$

${\displaystyle T_{\lambda ,\Omega }={\frac {L_{\mathrm {e} ,\Omega ,\lambda }^{\mathrm {t} }}{L_{\mathrm {e} ,\Omega ,\lambda }^{\mathrm {i} }}},}$

where

• L_e,Ω,ν^t is the spectral radiance in frequency transmitted by that surface;
• L_e,Ω,νⁱ is the spectral radiance received by that surface;
• L_e,Ω,λ^t is the spectral radiance in wavelength transmitted by that surface;
• L_e,Ω,λⁱ is the spectral radiance in wavelength received by that surface.

Luminous transmittance

In the field of photometry (optics), the luminous transmittance of a filter is a measure of the amount of luminous flux or intensity transmitted by an optical filter. It is generally defined in terms of a standard illuminant (e.g. Illuminant A, Iluminant C, or Illuminant E). The luminous transmittance with respect to the standard illuminant is defined as:

${\displaystyle T_{lum}={\frac {\int _{0}^{\infty }I(\lambda )T(\lambda )V(\lambda )d\lambda }{\int _{0}^{\infty }I(\lambda )V(\lambda )d\lambda }}}$

where:

• ${\displaystyle I(\lambda )}$ is the spectral radiant flux or intensity of the standard illuminant (unspecified magnitude).
• ${\displaystyle T(\lambda )}$ is the spectral transmittance of the filter
• ${\displaystyle V(\lambda )}$ is the luminous efficiency function

The luminous transmittance is independent of the magnitude of the flux or intensity of the standard illuminant used to measure it, and is a dimensionless quantity.

Internal Transmittance

Optical Depth

By definition, internal transmittance is related to optical depth and to absorbance as

${\displaystyle T=e^{-\tau }=10^{-A},}$

where

• τ is the optical depth;
• A is the absorbance.

Beer–Lambert law

The Beer–Lambert law states that, for N attenuating species in the material sample,

${\displaystyle \tau =\sum _{i=1}^{N}\tau _{i}=\sum _{i=1}^{N}\sigma _{i}\int _{0}^{\ell }n_{i}(z)\,\mathrm {d} z,}$

${\displaystyle A=\sum _{i=1}^{N}A_{i}=\sum _{i=1}^{N}\varepsilon _{i}\int _{0}^{\ell }c_{i}(z)\,\mathrm {d} z,}$

where

• σ_i is the attenuation cross section of the attenuating species i in the material sample;
• n_i is the number density of the attenuating species i in the material sample;
• ε_i is the molar attenuation coefficient of the attenuating species i in the material sample;
• c_i is the amount concentration of the attenuating species i in the material sample;
• ℓ is the path length of the beam of light through the material sample.

Attenuation cross section and molar attenuation coefficient are related by

${\displaystyle \varepsilon _{i}={\frac {\mathrm {N_{A}} }{\ln {10}}}\,\sigma _{i},}$

and number density and amount concentration by

${\displaystyle c_{i}={\frac {n_{i}}{\mathrm {N_{A}} }},}$

where N_A is the Avogadro constant.

In case of uniform attenuation, these relations become

${\displaystyle \tau =\sum _{i=1}^{N}\sigma _{i}n_{i}\ell ,}$

${\displaystyle A=\sum _{i=1}^{N}\varepsilon _{i}c_{i}\ell .}$

Cases of non-uniform attenuation occur in atmospheric science applications and radiation shielding theory for instance.

Other radiometric coefficients

Radiometry coefficients

• v
• e

Quantity		SI units	Notes
Name	Sym.
Hemispherical emissivity	ε	—	Radiant exitance of a surface, divided by that of a black body at the same temperature as that surface.
Spectral hemispherical emissivity	εν ελ	—	Spectral exitance of a surface, divided by that of a black body at the same temperature as that surface.
Directional emissivity	εΩ	—	Radiance emitted by a surface, divided by that emitted by a black body at the same temperature as that surface.
Spectral directional emissivity	εΩ,ν εΩ,λ	—	Spectral radiance emitted by a surface, divided by that of a black body at the same temperature as that surface.
Hemispherical absorptance	A	—	Radiant flux absorbed by a surface, divided by that received by that surface. This should not be confused with "absorbance".
Spectral hemispherical absorptance	Aν Aλ	—	Spectral flux absorbed by a surface, divided by that received by that surface. This should not be confused with "spectral absorbance".
Directional absorptance	AΩ	—	Radiance absorbed by a surface, divided by the radiance incident onto that surface. This should not be confused with "absorbance".
Spectral directional absorptance	AΩ,ν AΩ,λ	—	Spectral radiance absorbed by a surface, divided by the spectral radiance incident onto that surface. This should not be confused with "spectral absorbance".
Hemispherical reflectance	R	—	Radiant flux reflected by a surface, divided by that received by that surface.
Spectral hemispherical reflectance	Rν Rλ	—	Spectral flux reflected by a surface, divided by that received by that surface.
Directional reflectance	RΩ	—	Radiance reflected by a surface, divided by that received by that surface.
Spectral directional reflectance	RΩ,ν RΩ,λ	—	Spectral radiance reflected by a surface, divided by that received by that surface.
Hemispherical transmittance	T	—	Radiant flux transmitted by a surface, divided by that received by that surface.
Spectral hemispherical transmittance	Tν Tλ	—	Spectral flux transmitted by a surface, divided by that received by that surface.
Directional transmittance	TΩ	—	Radiance transmitted by a surface, divided by that received by that surface.
Spectral directional transmittance	TΩ,ν TΩ,λ	—	Spectral radiance transmitted by a surface, divided by that received by that surface.
Hemispherical attenuation coefficient	μ	m^−1	Radiant flux absorbed and scattered by a volume per unit length, divided by that received by that volume.
Spectral hemispherical attenuation coefficient	μν μλ	m^−1	Spectral radiant flux absorbed and scattered by a volume per unit length, divided by that received by that volume.
Directional attenuation coefficient	μΩ	m^−1	Radiance absorbed and scattered by a volume per unit length, divided by that received by that volume.
Spectral directional attenuation coefficient	μΩ,ν μΩ,λ	m^−1	Spectral radiance absorbed and scattered by a volume per unit length, divided by that received by that volume.

See also

• Opacity (optics)
• Photometry (optics)
• Radiometry

References

1. "Electronic warfare and radar systems engineering handbook". Archived from the original on September 13, 2001.
2. "Thermal insulation — Heat transfer by radiation — Vocabulary". ISO 9288:2022. ISO catalogue. August 1, 2022. Retrieved February 12, 2025.
3. IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Beer–Lambert law". doi:10.1351/goldbook.B00626